4. INSTALLATION OF GPS RECEIVER (OPTION)
22
5. Fasten two pan head screws (M2x4, supplied with option kit) to fix GPS receiver board
to the chassis removed at step 4.
Torque
0.14 + 0.01N m
(1.42 + 0.14kgf cm)
Connect to J5 on RF CON/CPU Board.
Connect to J4 on RF CON/CPU Board.
Connect to J8 on RF CON/CPU Board.
Fixing GPS receiver board
6. Fasten the screw (removed at step 4) to remount the chassis on RF CON/CPU Board.
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
