4. INSTALLATION OF GPS RECEIVER (OPTION)
23
7. Reattach the coaxial cable (removed at step 3) to J5.
8. Attach the connector 51065-0700-PHR7-L040 to J8 on RF CON/CPU Board.
16P0208A
16P0209
J8
J5
J4
51065-0700-PHR7-L040
H.FL-2LP-FHSB-(A)
Fix this connector cable with two clamps.
Terminal unit, cover removed (3)
9. Attach the connector H.FL-2LP-FHSB-A (100) to J4 on RF CON/CPU Board, and then
fix it with the clamp near J4.
10. Reassemble the terminal unit.
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
