4.4 System Setting: Option Menu
4-27
4.4.9 REGULATION
This function is currently inoperative. (2005/5)
This is a setup to reserve in Russian Type Approval.
- INTL Ver. : Set to INTL.
- Russian Ver. : Set to RUSSIAN.
4.4.10 VDR OUTPUT LEVEL
The VDR connection port is connected to #23 and #24 inside the Junction box
(IF-8810). Balance type output is 600 ohm/0 dBm and the adjustable range is –10 dBm
to +10 dBm.
Procedure
1. Select [MENU] -> SYSTEM -> VDR OUTPUT LEVEL and press [ENT] key.
VDR OUTPUT LEVEL
LEVEL (1 – 16)
<■■■■ ＞ 8
EXT: ENT
2. Set up the output level using either Channel Knob or arrow key and press [ENT] key
to store data.
Fig. 4.4.1 VDR Output
Output data
Output Level
Factory setting value: 8
(Approximately 0 dBm)
To Next Page
Loading...
