Furuno FM-8800D - Chapter 7. Updating Program; Updating; Program File

7.1 Updating
7-1
7.1 Updating
7.1.1 Program file
This program consists of Transceiver unit (FM-8800S/D), Handset (HS-8800) and DMC
I/F (IF-8820). Main program is use with both FM-8800S and FM-8800D.
Program folder and their contents are indicated in the table below.
Table 7.1.1 Program File List
File Size Category
DMCIF.BIN 11 KB
Deleted in Russian Ver.
BIN file
For DMC I/F program
FMDSP.BIN
422
KB
BIN file
Consists of H8S CPU and DSP program in
Transceiver unit
BIN
HAND.BIN 64 KB
BIN file
For Remote Handset program
LOADER FMLD.BIN 8 KB
BIN file
Common with Loader program
COMDSP.EXE 92 KB
Application file
File to carry out displaying update process of
Remote Handset and DMC I/F program
PROGRAM
UppgNT.exe
189
KB
Application file
Update file to carry out for Transceiver unit,
Remote Handset and DMC I/F program
UP8800.BAT 1 KB
Batch file
For updating Main program
UPHS.BAT 1 KB
Batch file
For updating Remote Handset program
UPIF.BAT 1 KB
Deleted in Russian Ver.
Batch file
For updating DMC I/F program
VER.txt 1 KB
Text document
Display contents of a holder and the program
version.
* The size is an only reference.
Batch file
- UP8800.BAT
program¥uppgNT loader¥fmld.bin bin¥fmdsp.bin 0 0 1 0 1
- UPHS.BAT
program¥uppgNT loader¥fmld.bin bin¥hand.bin 0 0 1 3 1
program¥comdsp -c1 -b57600
- UPIF.BAT
program¥uppgNT loader¥fmld.bin bin¥dmcif.bin 0 0 1 4 1
program¥comdsp -c1 -b57600
Chapter 7. Updating Program