Furuno FM-8800D - Jumper Setting; Remote Station

4.5 Jumper Setting
4-29
4.5 Jumper Setting
4.5.1 Remote station
As for DATA and LINE of Remote station that is in far from Transceiver unit
electrically, set JP2 and 3 to ON for terminate.
- When connecting Remote station(RB-8800, 8810) via DMC I/F is the same.
- When DMC IF is connected only to DMC-5 and DMC I/F is installed electrically
far from Remote station, terminate DATA line on DMC I/F side.
Fig. 4.5.1 Connection of DATA A/B Lines
Fig. 4.5.2 RB-8800, Jumper Setting
JP2
13
LINE
TERMINATION
RS-485
TERMINATION
ON
JP3
13
ON
FM-8800D/S
Junction box
IF-8810
Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810
DMC I/F
IF-8820
DMC-5
DATA A/B
LINE IN/OUT
Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810 Remote station HS-8800 & RB-8800/RB-8810
DATA A/B
LINE IN/OUT
Terminater
Terminater
Terminater
TXD
RXD
U1
(CPU)
RS-485 and LINE
RS-485
RS-485 and LINE
05P0782