5.1 Configuration
5-2
Fig.5.1.2 is the block diagram of the transceiver unit, FS-2570T.
- DSP board (05P0751) is needed for NBDP communication.
- DSC general frequencies receiver board (05P0734) can be installed optionally. The
DSC general frequencies receiver is connected to 2.6 m whip antenna with
preamplifier FAX-5 or MF/HF antenna. Jumper setting on TX FIL board (05P0736)
are changed according to the antenna type.
Fig.5.1.2 Block diagram of FS-2570T
To Next Page
Loading...
