Furuno FS-1570 - Chapter 5. Block Description; Configuration; Transceiver Unit

5-1
5.1 Configuration
See Chapter 1 for system configuration.
5.1.1 Transceiver unit
Fig.5.1.1 shows the block diagram of the transceiver unit, FS-1570T.
- DSP board (05P0751) is needed for NBDP communication.
- DSC general frequencies receiver board (05P0734) cannot be installed in FS-1570T.
During the scanning reception of DSC general frequencies by using TX/RX board,
radiotelephone and NBDP cannot be used.
Fig.5.1.1 Block diagram of FS-1570T
Chapter 5. Block Description