6.1 Self-test
6-2
Checking detail program number
With Daily test result display, press [1/RT] five times while holding [FILE] to check
detail program number.
Printing out test result
Press [8/PRINT] to print out the test result. Automatic printing out of the DSC test
result is selected in “PRINT OUT” setting in DSC SETUP menu. Set DIALY TEST to
ON.
Example
* FS-xxxx DAILY TEST *
MAY-24-2002-07:20
MMSI :431456789
MAIN CPU :OK VER. xx
PANEL 1 CPU :OK VER. xx
PANEL 2 CPU :OK VER. xx
MODEM :OK VER. xx
NBDP MODEM :OK VER. xx
RCVR 1 :OK
RCVR 2 :OK
TRX :OK
Table 6.1.1 lists the boards to be tested.
Table 6.1.1 Tested board by DSC test
Test Item Boards NG appear
MAIN CPU T-CPU
PANEL 1 CPU T-CPU or C-CPU in No.1 FS-2570C
PANEL 2 CPU T-CPU or C-CPU in No.2 FS-2570C
MODEM DSC DSP
NBDP MODEM NBDP DSP
RCVR 1 W/R1
RCVR 2 W/R2
TRX TX/RX
To Next Page
Loading...
