2.5 Antenna coupler
2-23
Danger
Electrical Shock
Hazard
Fig.2.5.4 Parts around antenna terminal
Note; High voltage presents at the antenna terminal and
associated parts. If the wires touch the parts, leaking will
result.
The table below shows the type and code number of the relay to be used in the matching
circuit.
Model Parts No. Type Code no.
AT-1560-25 K1 to K14, K16, K17, K20 to K22
AT-1560-15 K1 to K12, K16, K17, K20 to K22
G2R-1A-E-DC12V 000142953
AT-1560-25 K13, K18, K19
AT-1560-15 K15, K18, K19
JC-2AF-DC12V 000106216
AT-1560-25 K14, K15, K27, K28
AT-1560-15 K27, K28
FRD12023 000106069
Adjust the arrester for about
2 mm gap.
Wires should not touch any parts. These
carry high tension. See note.
To Next Page
Loading...
