Furuno GP-1650W - 4 INCORPORATION of DGPS BEACON RECEIVER KIT (for GP-1650 W)

14
4. INCORPORATION OF DGPS
BEACON RECEIVER KIT
(for GP-1650W)
The DGPS beacon receiver GR-7000A can be incorporated in the GP-1650W to provide it
with DGPS capability. Two kinds of kit are available as shown.
GR-7000A-1650-10N-019
GR-7000A-1650-15N-019S
Name Type Code No. Qty
Antenna Unit GPA-019 000-142-416 1
Beacon
Receiver
GR-7000A 000-143-249 1
Connector
Assy.
PH6P-W-L240 000-141-548 1
Pan head
screws
M3X10 C2700W 000-881-405 4
Cable tie CV-100 000-570-322 2
Screw* M3X12 SUS304 000-805-905 6
Cable Assy.
S.FL2-2LP0.7-D-
WHT (121)
000-141-491 1
Cable Assy.
S.FL2-2LP0.7-D-
WHT (175)
000-141-490 1
Clamp HP-2N 000-570-000 1
Cable Assy.*
S.FL2-2LP0.7-D-
WHT (250)
000-143-877 1
Screw* 3X8 SUS410 000-881-405 4
* Not used
Name Type Code No. Qty
Antenna Unit GPA-019S 000-142-545 1
Beacon
Receiver
GR-7000A 000-143-249 1
Cable Assy. TNC-PS-3D-15 000-133-670 1
Connector
Assy.
PH6P-W-L240 000-141-548 1
Pan head
screws
M3X10 C2700W 000-881-405 4
Cable tie CV-100 000-570-322 2
Screw* M3X12 SUS304 000-805-905 6
Cable Assy.
S.FL2-2LP0.7-D-
WHT (121)
000-141-491 1
Cable Assy.
S.FL2-2LP0.7-D-
WHT (175)
000-141-490 1
Clamp HP-2N 000-570-000 1
Cable Assy.*
S.FL2-2LP0.7-D-
WHT (250)
000-143-877 1
Screw* 3X8 SUS410 000-802-951 4
* Not used