1. OPERATIONAL OVERVIEW
1-12
1.8.3 How to customize the home screen
The home screen has seven screens that you can customize. (The full-screen plotter
display cannot be customized. If you try to customize this display, the message “Can’t
customize this display.” appears.) You can split the screen in up to four separate seg-
ments. In each segment you can select the following displays:
Follow the procedure below to customize a home screen. As an example, the proce-
dure shows how to put the plotter display and fish finder display on the halves screen.
1. Press the HOME/CTRL key to show the home screen.
2. Use the RotoKey
TM
to select the screen to customize.
3. Long-push the RotoKey
TM
to show the [PAGE CUSTOMIZATION] screen.
4. Select the division desired then push the RotoKey
TM
. For example, select the
halves screen. The [DISPLAY CUSTOMIZATION] screen appears.
The rectangle cursor (red) in the screen selection area circumscribes the screen
division currently selected. If necessary, use the RotoKey
TM
to select a screen
division.
Screen Displays available
Single screen Plotter, fish finder, tide and celestial, GPS status
Half screen Plotter, fish finder, highway, wind angle meter, meter (speed, water
temperature/temperature, engine), graph, tank
Quarter screen Navigation data, steering, wind angle meter, meter (same choices as
for half screen), graph, tank
To Next Page
Loading...
