Furuno GP-31 - Safety Instructions for the Installer

iiiiiiiiiiiiiiiiiiiiiiiiii
ii
WARNING
Do not open the cover unless totally
familiar with electrical circuits and
service manual.
Improper handling can result in electrical
shock.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or equipment damage. The
voltage rating of the equipment appears
on the label above the power connector.
DO NOT CUT THE ANTENNA CABLE.
See the instructions on the CAUTION
SHEET and the chapter on installation.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Ground the equipment to
prevent mutual interference.
Display
unit
Standard Steering
compass compass
0.5 m 0.3 m
Safety Instructions for the Installer