Furuno GP-31 - Default Chapter; Table of Contents

iii
TABLE OF CONTENTS
FOREWORD ........................................... iv
SYSTEM CONFIGURATION ............... v
EQUIPMENT LISTS.............................. vi
1. OPERATIONAL OVERVIEW
1.1 Control Description .............................1-1
1.2 Turning On and Off the Power ............1-2
1.3 Adjusting Display Dimmer
and Contrast ....................................... 1-2
1.4 Display Modes .................................... 1-3
1.5 Basic Menu Operation ........................1-7
1.6 Simulator Display ................................1-8
2. PLOTTER DISPLAY
OVERVIEW
2.1 Enlarging/Shrinking the
Display Range.....................................2-1
2.2 Shifting the Cursor ..............................2-1
2.3 Shifting the Display .............................2-2
2.4 Centering Own Ship’s Position ........... 2-2
2.5 Changing Track Plotting Interval,
Stopping Plotting of Track ................... 2-2
2.6 Erasing Track ...................................... 2-3
3. WAYPOINTS (MARKS)
3.1 Entering Waypoints .............................3-1
3.2 Entering the MOB Mark ......................3-3
3.3 Displaying Waypoint Name................. 3-4
3.4 Editing Waypoints on the
WPTS/MRKS List................................3-4
3.5 Deleting Waypoints .............................3-5
4. ROUTES
4.1 Creating a Route.................................4-1
4.2 Editing Routes.....................................4-4
4.3 Deleting a Route .................................4-6
5. NAVIGATION
5.1 Setting Destination by Cursor .............5-1
5.2 Setting Destination by Waypoint ......... 5-1
5.3 Setting Route as Destination ..............5-2
5.4 Canceling Destination......................... 5-2
6. ALARMS
6.1 Arrival Alarm, Anchor Watch Alarm .....6-1
6.2 XTE (Cross Track Error) Alarm ...........6-2
6.3 Speed Alarm .......................................6-3
6.4 DGPS Alarm........................................6-3
6.5 Time Alarm ..........................................6-3
6.6 Trip Distance Alarm .............................6-4
6.7 Buzzer Type Selection ........................6-4
7. OTHER FUNCTIONS
7.1 Calculating Range, Bearing and TTG .7-1
7.2 DGPS Setup, DGPS Data ..................7-2
7.3 Bearing Reference .............................. 7-5
7.4 Magnetic Variation ..............................7-5
7.5 Geodetic Chart System....................... 7-6
7.6 Units of Measurement.........................7-6
7.7 Position Display Format ......................7-6
7.8 Time Difference (using local time) ......7-7
7.9 GPS Setup ..........................................7-7
7.10 User Display Setup ...........................7-9
7.11 Resetting Trip Distance ................... 7-10
7.12 Uploading, Downloading Waypoint,
Route Data...................................... 7-10
7.13 Time Display ...................................7-14
8. MAINTENANCE &
TROUBLESHOOTING
8.1 Maintenance .......................................8-1
8.2 Displaying the Message Board ...........8-1
8.3 Displaying the GPS
Satellite Monitor Display .....................8-2
8.4 Diagnostic Test....................................8-2
8.5 When “BATTERY ALARM!” Appears ..8-3
8.6 Clearing Data ......................................8-4
9. INSTALLATION
9.1 Installation of Display Unit ..................9-1
9.2 Installation of Antenna Unit .................9-1
9.3 Wiring ..................................................9-2
9.4 Initial Settings......................................9-3
APPENDIX
Menu Tree.............................................. AP-1
Loran C Chains ...................................... AP-3
Decca Chains......................................... AP-4
Geodetic Chart List ................................ AP-5
SPECIFICATIONS............................ SP-1
OUTLINE DRAWING ......................... D-1
INTERCONNECTION DIAGRAM .. S-1
INDEX ..............................................Index-1
Declaration of Conformity (GP-31, GP-36)