What to do if Furuno GPS position is not fixed within 90 seconds?
If your Furuno GPS position isn't fixed within 90 seconds, first ensure the antenna connector is securely fastened. Then, check the number of satellites on the Satellite Monitor display. If you see two or fewer satellites, check for any obstructions between the antenna unit and the satellites.
Why is my Furuno GPS position wrong?
If the position displayed on your Furuno GPS is wrong, verify that the correct geodetic chart system is selected on the GPS Setting screen. You can also enter a position offset on the GPS Setting screen to correct the displayed position.
What to do if Furuno GP-39 position is wrong?
If your Furuno GPS position is wrong, verify that the correct geodetic chart system is selected on the GPS Setting screen. You can also enter a position offset on the GPS Setting screen.
Why is the bearing wrong on my Furuno GPS?
If the bearing displayed on your Furuno GPS is wrong, check the Magnetic Variation setting on the Plotter Setup screen.
How to troubleshoot Furuno GPS when it doesn't turn on?
If you cannot turn on the power to your Furuno GPS, check that the power cable is firmly fastened. Also, inspect the power cable and connector for any damage. Finally, check the battery to ensure it's providing the proper voltage output.
What to do if no picture appears on Furuno GPS?
If no picture appears on your Furuno GPS, press the /BRILL key several times to adjust the brilliance.
Why do Loran C/Decca TDs not appear on my Furuno GPS?
If Loran C/Decca TDs do not appear on your Furuno GPS, check the Loran C/Decca chain data on the Pos/TD Setup screen.
What to do if Loran C/Decca TDs are wrong on Furuno GPS?
If the Loran C/Decca TDs are wrong on your Furuno GPS, enter the TD offset on the Pos/TD Setup screen.
What to do if Furuno GPS has no response when a key is pressed?
If there is no response when a key is pressed on your Furuno GPS, turn the power off and on. If there is still no response, ask your dealer.
How to fix Furuno GP-39 GPS when it won't turn on?
If your Furuno GPS isn't turning on, check that the power cable is firmly fastened and inspect the power cable and connector for any damage. Also, check the battery for proper voltage output and inspect the fuse to see if it has blown. If the fuse has blown, determine the reason before replacing it. If it blows again after replacement, contact your dealer for advice.
General| Display Type | LCD |
|---|---|
| Display Size | 4.3 inches |
| Position Accuracy | 3 meters |
| Waterproof Rating | IPX7 |
| Power Supply | 12-24 VDC |
| Weight | 0.7 kg 1.5 lb |
| Display Resolution | 480 x 272 pixels |
| Update Rate | 1 second |
| Accuracy | 3 meters |
| Differential GPS Support | WAAS |
| GPS Channels | 12 channels |
| Accuracy (WAAS) | 3 meters |
| Languages | English, French, Spanish, German, Italian |
| Channels | 12 channels |
To Next Page
