What to do if Furuno Marine GPS System locks up after clearing memory?
If the Furuno Marine GPS System locks up after clearing the GPS and plotter memories, reapply power to the equipment. This should restore normal operation.
What to do if Furuno GP-80 GPS locks after clearing memories?
If your Furuno GPS equipment locks up after clearing the GPS and plotter memories, reapply power to the equipment to restore normal operation.
General| Power Supply | 12-24 VDC |
|---|---|
| Update Rate | 1 second |
| Operating Temperature | -15°C to +55°C |
| Channels | 12 |
| Routes | 50 |
| Display Type | LCD |
| GPS Receiver | 12 channels |
| Frequency | L1 (1575.42 MHz) |
| Display | Color LCD |
| Type | GPS Navigator |
| Waypoints | 1000 |
To Next Page
