Furuno NAVNET 1734C - Selecting a Display; Display Modes

1. OPERATIONAL OVERVIEW
1-8
1.5 Selecting a Display
1.5.1 Display modes
If you have a radar, navigator and network sounder five full-screen displays are available:
radar, plotter, echo sounder, nav data and overlay. In addition to the full-screen display, you
can divide the screen into halves and thirds to show two and three sets of images on a
combination display.
Full screen
(Ex. radar)
Combination screen
(Ex. radar + sounder)
Overlay screen
(Radar and plotter,
color model only.
Requires L/L data)
Display screens
The table below shows the displays available with each screen type.
Screen type and available display screen
Full screen Combination screen options
(half- or thirds-screen)
Overlay screen
options
Plotter, radar, sounder,
nav data, overlay
Plotter, radar, sounder,
compass (or wind), highway,
compass (or wind)/highway,
nav data, overlay
Radar + plotter