6. DATA TRANSFER
6-6
Route data menu
$GPRTE, x, x, a, ccc, c----c, c----c, ... , c----c <CR><LF>
1
2
3
4
5
6
12
Route data format
1: Number of sentences required for one complete route data (1 to 4). See Note 2.
2: Number of sentences currently used (1 to 4)
3: Message mode (Always set to C)
4: Route No. (001 to 300, 3 digits required)
5 through 12: Waypoint name (Max. 8 names, length of each waypoint name is fixed to 7
byte)
Note 2: A route can may contain 35 waypoints, and the GPRTE sentence for one route
data may exceed 80 byte limitation. In this case, route data is divided into several GPRTE
sentences (Max. 4 sentences). This value shows the number of sentences the route data
has been divided.
Route comment data format
12
$PFEC, GPrtc, xx, c----c <CR><LF>
Route comment format
1: Route No. (01 to 200, 3 digits required)
2: Route comment (Max. 16 characters, variable length)
The same characters of the comment for waypoint comment can be used.
End of sentence
$PFEC, GPxfr, CTL, E <CR><LF>
End of sentence
To Next Page
Loading...
Need help?
General
