Furuno NAVpilot-711C Manual

7
Optimus CANtrack Display
3.1 Operation Information
The Optimus CANtrak display will show the current mode status at the top of the screen.
Under normal operating conditions, “ALL HELMS ACTIVE” is displayed. The CANtrak
display will show “AUTO-PILOT MODE” when the NAVPILOT is engaged in either the AUTO
or NAV mode.
3.2 Override (OVRD) mode of NavPilot
The NavPilot will display OVRD mode during the following conditions. When operating the
Helm or Joystick, or in one of the Optimus operating modes such as Position Hold, Heading
Hold or Position and Heading Hold.

Furuno NAVpilot-711C Specifications

General

Brand	Furuno
Model	NAVpilot-711C
Category	Autopilot System
Language	English