2. HOW TO SETUP THE MENU
17
Simple diagnostic test
Click the [Stat Diagnostic] button on the [Simple Diagnostic] tab to start the simple diagnostic test.
The simple diagnostic test checks the performance of the SATELLITE COMPASS
™
. The following
table shows the test result of the simple diagnostic test:
Test Result Remarks
Common test results
ROM/RAM ROM ROM test result (OK or NG).
Internal RAM Internal RAM test result (OK or NG).
Test result for SC-33
TEST/RESULT GYRO Gyro sensor test result (OK or NG). From left: X-axis, Y-axis, Z-
axis test result
ACC Acceleration sensor test result (OK or NG).
From left: X-axis, Y-axis, Z-axis test result
G1 Memory test result for GNSS core 1 to 3 (OK or NG) and version
information.
G2
G3
ENV Air pressure sensor test result (OK or NG).
MAG Magnetic sensor test result (OK or NG).
ANT
The software version of the SATELLITE COMPASS
™
and soft-
ware released date (yyyy/mm/dd/hh/mm).
MT Operating time of the MAIN board (unit: hour).
ST Operating time of the SUB_IMU board (unit: hour).
Test result for SCX-20
TEST/
RESULT
Acc Acceleration sensor status (OK or NG).
Gyro Gyro sensor status (OK or NG).
Mag Magnetic sensor status (OK or NG).
TEST/
RESULT
Press Air pressure/temperature sensor status (OK or NG).
GNS Memory status for GNSS core 1 to 4 (OK or NG).
ANT Status for antenna 1 to 4 (OK or NG).
ST Version information for the starter program.
B1 Version information for the booter 1 program.
B2 Version information for the booter 2 program.
G1 Version information for GNSS core 1 to 4.
G2
G3
G4
Time
Operating time from when the SATELLITE COMPASS
™
is turned
on.
Overall Total operating time from the first time the SATELLITE COM-
PASS
™
is started.
Test result for SCX-21
TEST/
RESULT
Rate Gyro Gyro sensor status (Good or Bad).
Acceleromtr Acceleration sensor status (Good or Bad).
Magnetic Magnetic sensor test status (Good or Bad).
Press.Temp. Air pressure/temperature sensor status (Good or Bad).
Installation The number of times antenna vibration is detected
GNS Status for GNSS core 1 to 4 (OK or NG).
ANT Status for antenna 1 to 4 (OK or NG).
To Next Page
Loading...
