Furuno TZT2BB - Page 49

3. EQUIPMENT SETUP
3-11
[PROPULSION ENGINE] or [OTHER ENGINE] menu
CZone
Reset instrument pages, default settings
[Initial Setup] menu - [Engine & Tank Automatic Setup]
The TZT2BB will automatically detect engines and tanks connected to the same net-
work. This is the recommended method for setting up engines and tanks.
Menu Item Description Options (setting range)
[Max. RPM] Set the maximum rpm of your engine to
show on the RPM display.
1 (rpm) to 20,000 (rpm)
[Red Zone Oil Pressure] Set the starting value for the red zone area
of the oil pressure meter.
0 (psi) to 143 (psi)
Max. Oil Pressure Set the maximum oil pressure of your
engine.
1 (psi) to 144 (psi)
Min. Temperature Set the minimum temperature for your
engine.
0.00°C to 99.00°C
[Red Zone Temperature] Set the starting value for the red zone area
of the engine temperature indicator.
0.01°C to 999.00°C
Menu item Description
[Add Default CZone
Pages]
Create, edit C-Zone pages.
[CZone DIP Switch
Settings]
Set this unit’s DIP switches. For the serviceman. Do not change the set-
tings.
Menu item Description
[Reset Instrument Pag-
es]
Resets all instrument pages to default. [OK], [Cancel]
[Reset Default Set-
tings]
Resets applicable settings to default. [OK], [Cancel]