Furuno TZT9 User Manual

14. HOW TO ADJUST SETTINGS
14-7
*: These labels are replaced with the nicknames if they are set in [Camera] of the main
menu.
Menu items available in the instruments mode
How to select the RotoKey mode to use
You can select the RotoKey mode to use from [Base] or [Full].
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [General] - [RotoKeys] menu.
3. Select [Base] or [Full], then select [Close] to exit the menu.
TZT9/TZT14: The [Full] set can be always selected by long pushing the RotoKey
TM
.
Brightness - Adjust the brightness for video image. No Yes
Display
(TZT9/TZT14
only)
NavData Open the data boxes. No Yes
Menu Open the main menu. No Yes
Lists Open the lists. No Yes
Tide Open the tide graph. No Yes
Control label
Function Base Full
Level 1 Level 2
Steering - Show steering display. Yes Yes
NAVpilot - Show NAVpilot display Yes Yes
Highway - Show highway display. Yes Yes
Engine (If one en-
gine only)
- Show engine display. Yes Yes
Engines (If more
than one engine)
All Show all engines display. Yes Yes
Engine 1 Show engine 1 display. Yes Yes
Engine 2 Show engine 2 display. Yes Yes
Engine 3 Show engine 3 display. Yes Yes
Engine 4 Show engine 4 display. Yes Yes
Tank Level - Show tank level display. Yes Yes
Weather - Show weather display. Yes Yes
Wind - Show wind display. Yes Yes
Display
(TZT9/TZT14 only)
Menu Open the main menu. No Yes
Lists Open the lists. No Yes
Tide Open the tide graph. No Yes
Control label
Function Base Full
Level 1 Level 2
Base
Full
RotoKeys
Base

Furuno TZT9 Specifications

General

Brand	Furuno
Model	TZT9
Category	Monitor
Language	English