Furuno VR-3000 - MAINTENANCE PROCEDURES

15
Picture is aligned?
No
Change Phase setting.
Picture is shaped?
No
Press Test button.
Change Gain / Offset settings.
Picture is good?
No
Press Test button.
End
Yes
Change Color mask setting.
Press Test button.
Noise is eliminated?
Yes
No
Press Submit button.
Find a vertical line
and make it a
straight line.
Picture is in position
and correct size?
To previous page
Wait for 5 to 15 second.
Wait for 5 to 15 second.
Wait for 5 to 15 second.
Wait for 5 to 15 second.
Fig. 3.10 (2/2)