FUTABA 12K - Page 103

103
<Functions of Linkage Menu>
② Movethecursortothe"RECEIVER"or"SENSOR"(SBS-XXXetc.)and
pushtheRTNbutton.
③ Youwillusethe"Display"functiontochoosehowmanysensorsare
shownonyourTelemetrymonitor.
④ IfyouwanttoshowtwosensorsonyourTelemetryscreen,select2in
"Display".ThenmovedowntotheSensortoselectwhichotheritemis
shown.
If a cursor is moved to items (Rx-BATT,
EXT-VOL,TEMP. etc.) and RTN is pushed,
the alarm setting screen of the item will be
displayed.
1
1
2
13
24
[Displayposition]
⑤ IfyouwanttoshowthreesensorsonyourTelemetryscreen,
select3in"Display".ThenmovedowntotheSensortoselect
whichotheritemisshown.
⑥ ToSENSOR"----------"selectionwillreduceadisplayitem.
When using a sensor that has two or more functions, you will want to
scroll to select which will be displayed. (ALTITUDE,VARIO,etc.)
① TheHOME/EXITbuttonispushedfromHOMEscreenandTELEMETRY
MONITORiscalled.
TELEMETRY MONITOR set up