126
<Model Menu (Common Functions)>
MODEL MENU (COMMON FUNCTIONS)
This section describes the D/R, program mixing,
and other functions common to all model types.
Before setting the model data, use the Model
Type function of the Linkage menu to select the
model type matched to the aircraft. If a different
model type is selected afterwards, the D/R, program
mixing, and other parameters are reset.
If either a helicopter or glider have been selected
DVWKHPRGHOW\SHWKHQWKHVSHFL¿FIXQFWLRQVLQWKH
0RGHOPHQXFDQEHVHWIRUHDFKÀLJKWFRQGLWLRQ,I
you want to switch the settings for each condition
by switch, stick position, etc., use the Condition
6HOHFWIXQFWLRQWRDGGÀLJKWFRQGLWLRQV8SWR¿YH
conditions can be used)
Note: The T12K is designed so that the airplane
and glider (including EP glider) model types
are compatible with aircraft of similar type
wings.
This section outlines the relationship between
the functions common to airplanes and
gliders, except some dedicated functions,
and model type.
The setting menus will depend on the number
of servos and other differences according to
the wing type used. The setup screens in the
instruction manual are typical examples.
*The Model menu screen depends on the
model type.
Model Menu functions (Common) list
Ɣ6(592
6HUYRWHVWDQGVHUYRSRVLWLRQGLVSOD\)RUD
description of its functions, see the Linkage Menu
section.)
Ɣ&21',7,21DSSOLFDEOHWRKHOLFRSWHUDQG
JOLGHUVHOHFWLRQV
)OLJKWFRQGLWLRQVDGGLWLRQGHOHWLRQFRS\
condition renaming, and condition delay can be set.
Ɣ'8$/5$7(
The D/R curve of a T12K transmitter may be
DFWLYDWHGIURPDVZLWFKVWLFNSRVLWLRQHWF)RU
information on how to do so, please refer to the
Switch Setting Method located at the back of this
manual.
Ɣ352*0,;
The T12K transmitter allows up to five
completely customizable program mixes.
To Next Page
Loading...
