FUTABA 12K - Page 98

98
<Functions of Linkage Menu>
LOG1.However,ifthemaximumnumberofrecordsis
reached(6393)thesystemwillcreateanewfilenamed
"LOG2".Ifadditionalfilesareneededtheywillbename
sequentially,"LOG3",LOG4andsoon.
Theloggedelapsedtimewillcontinuetocountineach
ofthelogfiles.
Logfilesmaybemergedafterimportingintoa
spreadsheetorsimilarsoftware.
*WhentheINTERVALis0sec,theactualintervaltimeis
approximatlysetto0.1Sec.
*FFSVer.3.0(freedownload)isnecessarytoexportthe
loggeddatafromthemicroSDcard.
The"Export"functionofFFSVer.3.0.createsa.cvsfile
fromtheLOGxdatafile.Thedelimiteroftheexported
fileswillbe"comma"or"semi-colon"basedonthe
defaultsettingofthePCusedtoimportthedata.
Caution
*PleasedoNOTuseMODELSELECTfunctionwhilethe
loggingfunctionisON.
◆ TheT12KwritesatinyfilesystemtothemicroSD
card.Pleasenotethefollowinginformationabout
DataLogging.
*Approximately0.3secisneededtowriteanewfile
tothemicroSDcard. Thismeanstheactualstartof
loggingdatais0.3Secaftertheloggingswitchisturned
on.
*Amaximumof6393recordscanbesavedperfile.
(Eachrecordcontainstheelapsedtime,CHdataandthe
telemetrydata.)
*Ifthemaximumof6393recordsisreachedduringthe
loggingprocess,theT12Kwillautomaticallycreatea
newfileandcontinuetologdata.Remember,ifthe
systemtakesapproximately0.3sectocreatethenew
file.Therewillbealapseintheloggeddataduringthat
periodoftime.
*ThefilesnameoftheloggeddataonthemicroSDcard
arefixed,thefirstfilewillbelabeled"LOG1".
IftheloggingON/OFFswitchiscycledduringthesame
flyingsession,thedatawillcontinuetobewrittento
If the pause switch is turned on while the telemetry data is
recorded, recording the telemetry data to the memory card
is stopped temporally. When the pause switch is turned off,
logging the telemetry data is resumed and recorded to same
GDWD¿OHDIWHUWKHLQWHUYDOWLPH
This is a hardware for the pause switch of the telemetry
logging function.
TELEMETRY DATA LOG (icon)
ThecardiconindicatesthatthetelemetrydataloggingfunctionZRUNV DW +20( VFUHHQDQG 7(/(0
021,VFUHHQ
Loggingdataisstop.
Loggingdataisstop.
Loggingdataisrunning.
Loggingdataisrunning.