FUTABA 3PRKA - Assembly; Adjustment; Receiver and Servo Connection; Receiver Antenna Installation

12
Assembly / Adjustment
Assembly / Adjustment
Receiver and Servo Connection
As you connect the receiver, servos and other components, do so in accordance with the
"Assembly Precautions".
Connections when a E.S.C. MC230CR or MC330CR are used.
Steering Servo
Throttle Servo
Receiver
Receiver
Power Switch
To Receiver
Battery
Steering Servo
E.S.C.
Power Switch
Connects to Motor
Connects to Battery
Gas Powered Model
Receiver Antenna Installation

Note: The operating range may become shorter, depending on where the
receiver and the antenna are mounted.
WARNING
)NSTALLTHEANTENNAINTHEHIGHERPLACEASSHOWNINTHElGURE
+EEPTHE ANTENNA AS FAR AWAYFROM THE MOTOR%3# AND OTHER
NOISESOURCESASPOSSIBLE
0UTTHEANTENNAINTHEANTENNATUBETOPROTECTIT

$ONOTCUTTHEANTENNA
$ONOTBENDTHECOAXIALCABLE$OINGSOCAUSESDAMAGE
Antenna
tube
Antenna
Coaxial
cable
R203GF