FUTABA 4PL-2.4GHZ - Model Selection (SEL); Using the Model Select Function

Move the cursor to EXEC:+/-
and press the (+) and (-)
buttons simultaneously for ap-
proximately 1 second.
Modified model # and model
name
Move the cursor to M-No and
select model # with the (+) or (-)
button.
Move the cursor to MODE and
select "SEL" with the (+) or (-)
button.
39
Function
Model Selection "SEL"
Forty model data (model data for 40 R/C cars) can be saved in the 4PL transmitter and
used when the relevant model data is called.
Model / Receiver Type / Servo Response Mode "MODEL RX"
When the receiver type and servo response were changed to a different model (FH,
SFH or HIGH, NORM) and the type was changed to a different model, signals are
output by previous model type until the transmitter power is turned off. Use after
turning the transmitter power off and on.
- Display the MODEL RX menu by referring to P38.
1
(Selection of model select)
Move the cursor to MODE by (UP) or (DN)
button and select "SEL" with the (+) or (-)
button.
Using the model select function
Model #.
M1~M40
2
(Model No. selection)
Move the cursor to M-No by (UP) or (DN)
button and select the model number with
the (+) or (-) button. "M1" ~ "M40" are dis-
played.
3
(Model select execution)
Move the cursor to EXEC:+/- by (UP) or (DN) button and
press the (+) and (-) buttons simultaneously for approximate-
ly 1 second. A beeping sound is generated and the model is
selected.
- Model change is complete when the model No. and model name on the screen change.
4
When ending, return to the menu screen by pressing the (CT)
button.