FUTABA 4PL-2.4GHZ - Timer Function (TIMER); Up Timer Function Description; Up Timer Operation Details

86
Function
Timer Function "TIMER"
Use the timer by selecting one of the three timers UP TIMER, DOWN TIMER, and
LAP TIMER.
UP TIMER function
Up timer function
- This function can be used to count the time between start and stop, etc.
- The timer repeatedly starts and stops each time the switch is pressed
and accumulates the time between each start and stop. When the count
reaches 99 minutes 99 seconds, the count returns to 00 minutes 00 sec-
onds and is repeated.
- The first start operation can be linked to the throttle trigger.
- The passage of time is announced by sounding of a buzzer (beep) each
minute after starting.
- Alarm :Beep sounds at the set time (minute).
- Prealarm :Alarm advance announcement sound. Beeping begins 5 seconds before the alarm.(beeps)
- After starting, the timer continues to count and can be stopped by switch even when
the LCD switches to another screen.
Timer Function "TIMER"
CT
(HOME screen)
(UP TIMER)
(DOWN TIMER) (LAP TIMER)
Select the timer display