FUTABA 4PL-2.4GHZ - Page 95

Backlighting time (LHT-TM)
1~30
Initial value: 10
Battery Type (BATT)
DRY4, N5/L2
Buzzer tone (BUZZER)
OFF, 1~100
Initial value: 85
(DRY4 )
(N5/L2)
Voltage display
When BATT is set to dry cell
use DRY4 or N5/L2, the volt-
age display of the HOME screen
changes.
95
Function
(Setting liquid crystal backlighting time)
Select the setting item "LHT-TM" by (UP) or (DN)
button , and use the (+) and (-) buttons to set the
ON time.
- When "KEY" is set at the preceding item, this ON time be-
comes effective .
When ending, return to the menu screen by
pressing the (CT) button.
(Setting the battery type)
Select the setting item "BATT" by (UP) or (DN)
button , and select the mode by pressing the (+)
or (-) button.
"N5/L2" :Futaba rechargeable type battery
"DRY4" :Dry cell battery (alkaline battery recommended) 4 batteries
System Functions "SYSTEM"
When ending, return to the menu screen by pressing the (CT)
button.
(Adjusting the buzzer tone)
Select the setting item "BUZZER" by (UP) or
(DN) button , and use the (+) and (-) buttons to
adjust the tone.
- Decide by referring to the tone at adjustment.
When ending, return to the menu screen by
pressing the (CT) button.