FUTABA R7108SB - Page 85

85
INT (integration) Timer is the function which changes progress of a timer according to the location
of the throttle stick. When the throttle stick is raised for faster speed, the speed of the timer usually
increases. With the throttle stick at mid-range speed, the timer speed decreases (to 50%). When the
throttle is positioned at low end, the timer's progress stops. It's possible to set it in the time which
ts power consumption of your fuselage.
*The consumption of the battery/fuel is different depending on the conditions, so use an INT Timer as
reference.
*The INT (integration) time is different from the actual elapsed time.
High
Middle
Low
Whenathrottlestickisthe
highside,thespeedofthe
timerusuallyincreases.
Whenathrottlestickis
middle-speed,thetimer
speeddecreases(by50%).
Whenathrottlestickislow,
timerprogressstops.
NomalTimer
TH%:
IntegrationTimer
IntegrationTimer
● Select [Timer] at the linkage menu and call the setup
screen shown below.
Tap
INT time (%)
INT Time