FUTABA T14SG - Select the Source of the Data

3. Update software of T14SG
1. Please insert the SD card which includes the update le.
2. Push the HOME/EXIT button.
3. While still holding the HOME/EXIT button, power
on the transmitter.
4. After a few seconds, the following screen is displayed.
5. Push the U.MENU/MON. button for three
seconds. The software update will begin.
6. When the update is complete, the following screen is
displayed. Turn o the power switch.
7. Remove the SD card.
8. Please check the software version at INFO in SYSTEM
menu.
HOME/EXIT
button
U.MENU/MON.
button
PROGRAM UPDATE
START : PUSH MON . 3SEC
PROGRAM UPDATE
UP LOADING
-3-
PROGRAM UPDATE
COMPLETED