- 2 -
④ If you want to show two sensors on your
Telemetry screen, select 2 in "Display".
Then move down to the Sensor to select
which other item is shown.
⑤ If you want to show three sensors
on your Telemetry screen, select 3
in "Display". Then move down to the
Sensor to select which other item is
shown.
⑥ To SENSOR " ----------" selection will
reduce a display item.
2. Telemetry Speech function
■ There is not only a software update, but also a
Speech update that must be done.
■ There are two languages available in the
Speech data, English and German.
■ The language chosen for the Speech data will
affect only the Speech function. It will not
change the language used in the transmitter's
text display.
■ The Speech function can only be used with
headphones plugged into the phone jack.
■ You will need to purchase headphones or
earphones with a 3.5plug.
● TELEM.SET. menu is added to the
LINKAGE MENU.
When using a sensor that has two or more
functions, you will want to scroll to select
which will be displayed. (ALTITUDE,VARIO,
etc.)
1
2
1 3
2
The speech language installed is
indicated. When the speech data is
not installed, "----------" is displayed.
The version No. of the speech data
file is indicated. When the speech
data is not installed, nothing is
displayed.
The interval of speech can be set.
The setting range is from 0 [Sec] to
30 [Sec].
Earphone plug
To Next Page
Loading...
