FUTABA T16IZ - OperationsRelatedToServoSpeed

213
→ GO to TABLE OF CONTENTS
Operations related to servo speed
Servospeedsetting
The servo speed at each function
operation (including flight condition
switching) can be adjusted. The servos
operate s m o othly at a fixed sp e e d
corresponding to the set speed. The
operating speed (In side) and return speed
(Out side) can be set individually.
Switch the operation mode according to
the set function.
"Symmetry" mode: Used with ailerons
and other self neutral functions.
"Linear" mode: Used with functions
which hold the operation position of
the throttle and switch channel, etc.
[Setting method]
1 . S e l e c t t h e m o d e ( [ L i n e a r ] o r
[Symmetry]). Each time the button is
tapped, it toggles between [Linear]
and [Symmetry].
2. Tap the In or Out Speed button and
set the servo speed.
Initial value: 0
Setting range: 0~27
（First）0～27（Slowly）（First）0～27（Slowly）
In speed
Out speed
In case of Symmetry
In case of Linear
Out speed
In speed
Symmetry
In
Speed
Out
Speed
In
Speed
Out
Speed
Linear
In
Speed
Out
Speed