Rx 1
Rx 2
Rx 3
Model 2 selected*
Since it can control other
models regardless of the active model, there is a
risk of flying with the wrong model data !
Conventional system
Operation
Operation
Operation
1:
3:
Model 1
Model 2
Model 3
2:
Model 2 is selected*
Model 2 only works with model 2 data.
There is no risk of flying with the wrong model data.
Model ID
Rx 1
Rx 2
Rx 3
Operation
No Operation
No Operation
1:
3:
Model 1
Model 2
Model 3
2:
In Ver 3.9 or later software with the model ID function added, model data saved on the SD card cannot be called using the model
select function. To use the model data of the SD card, copy the model data to the transmitter.
If the model data of the SD card was selected before the update, an error message will be displayed at the first startup after the
update, and the model will automatically switch to the model data of the transmitter.
1. Add Model ID
FASSTest, T-FHSS
As an added level of safety in the form of Model ID, which will prevent the accidental control of a model
when using a different model data by preventing link.
1. Add O.S.ENGINE EM-100
Telemetry function FASSTest, T-FHSS
Supports EM-100 firmware version Ver.8.00 or later.
1. Fixed defect
Fixed a problem that telemetry reception time.
T18SZ SOFTWARE UPDATE CHANGES
This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a
supplement to the original instruction manual that accompanied the transmitter. Please refer to the original instruction manual where
applicable, but replace the steps indicated below with these instructions. Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the version numbers as noted above.
V3.11
V3.9
V3.10
1M23Z04333
Important: When you update your radio to V3.9 and add the Model ID function, you
must re-link existing FASSTest or T-FHSS receivers in your current models.
To Next Page
Need help?
General
