FUTABA T18SZ Software Update Changes

T18SZSOFTWAREUPDATECHANGES
V3.1
This software updates or alters the functions and features noted below. The instructions and information that follow are meant as a
supplement to the original instruction manual that accompanied the T18SZ transmitter. Please refer to the original instruction manual where
applicable, but replace the steps indicated below with these instructions. Please check to ensure that the update has been installed.
1) Select the System Menu.
2) Touch the [Information] button.
3) Confirm that the information in the display indicates the version numbers as noted above.
1. Telemetry display (The extension of
the number of telemetry data which is
shown)
The number of telemetry data shown on the
Telemetry display screen is extended. It is 16 items
(4 pages) maximum.
2. Timer Alarm
Added a setting to continue the alarm after the
alarm set time.
3. Model select
Model data of FX-32 can be used.
4. Data Converter
FX-30 and T12FG have been added to the data
converter compatible models.
The transmitter name is displayed on icon.
Sensortypeselectionscreen
Sensorselectionscreen
You can choose which type of sensor to display.
Tap the sensor type.
For some sensor types, you can choose the
display item. Tap to select.
5. Butterfly Elevator setting (Glider)
Added fine tuning function to butterfly elevator setting.
,IWKHW\SHVHOHFWHGLVÀ\LQJZLQJWKH(OHYDWRUVHWWLQJZLOOQRWDSSHDU
Constant:Thealarmdoesnotstop
Onetime:Stopthealarmatonce
Ifyoudonotwanttodisplaytelemetrydata
onthetelemetrymonitorscreen,select"---".

FUTABA T18SZ Specifications

General

Channels	18
Frequency	2.4GHz
Telemetry	Yes
Modulation	FASSTest, FASST, S-FHSS, T-FHSS
Display	Color LCD
Model Memory	30