EasyManuals Logo

FUTABA T32MZ Manual

FUTABA T32MZ
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
FlightTune(Aileron/ElevatorBasicsettings)
FlightTune(Aileron/ElevatorBasicsettings)
(3) Cnt. AuthAIL: Control Authority Aileron
Aileron Control Authority changes the rate at which the gyro will try to
achieve the set "CYC. Rt". A higher value will create a quicker accelerated
reaction to a stick input to reach and stabilize to the "CYC. Rt" value; a
lower value will reach the desired "CYC. Rt" slower and accelerate slower
to the desired angular rate.
Note: Setting this value too high could lead to a jerky feeling when mak-
ing rapid stick corrections, a value too low will give you the impression the
model is not following the pilot’s stick inputs. Values of between 20-60 are
the suggested range for most helicopters.
Settingranges:0~100%
Initialvalue:Cnt.AuthAIL=40%
(4) Cnt. AuthELE: Control Authority Elevator
Elevator Control Authority changes the rate at which the gyro will try to
achieve the set "CYC. Rt". A higher value will create a quicker accelerated
reaction to a stick input to reach and stabilize at the "CYC. Rt" value; a
lower value will reach the desired "CYC. Rt" slower and accelerate slower
to the desired angular rate.
Note: Setting this value too high could lead to a jerky feeling when mak-
ing rapid stick corrections, a value too low will give you the impression the
model is not following the pilot’s stick inputs. Values of between 20-60 are
the suggested range for most helicopters.
Settingranges:0~100%
Initialvalue:Cnt.AuthELE=40%
(5) EXPO.: Exponential
Tune the exponential as desired to change the feel of the cyclic controls
around center stick. Negative values soften control feel; Positive values
increase sensitivity.
Note: that any exponential present in the TRANSMITTER adds to the value
set in the CGY.
Settingranges:-100~0~+100%Initialvalue:-20%
(6) FLT. Styl: Flight style
Increasing this value will create a more robotic reaction to the stick, leaving
the pilot with the impression that the model is locked into in a position after
an input. It will also tend to have a more calculated feeling when making in
-
puts.
-Lowering the value will make the model feel more fluid and easy to rotate with
the stick input. The model will feel a little more lively during faster cyclic move
-
ments and direction changes.
Settingranges:0~+100
nInitialvalue:+50
n
Cond
Cond
Cond
Cond

Other manuals for FUTABA T32MZ

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FUTABA T32MZ and is the answer not in the manual?

FUTABA T32MZ Specifications

General IconGeneral
BrandFUTABA
ModelT32MZ
CategoryRemote Control
LanguageEnglish

Related product manuals