FUTABA T32MZ

4
A.Wiredconnection:Advancedsettings
1.Select"Gyrosetting"onthelastpageof
HelicopterModelMenu
3.Homescreenisdisplayed
Tobasicmenu
Toexpertmenu
Toreceiver
2.Select"Start"
*Atthistime,ifGyroisnotconnectedtoT32MZbywire,theEQ
IDscreenappears.
1
3
2
SETTING
CAUTION
Be sure to connect and disconnect the CGY760R/CGY755 and
T32MZ connection cable with the power off.
◆ WhencopyingdatafromGyroAtoGyroB
ConnectthegyroAtotheT32MZandpress[Start].(EnterthedataofAintoT32MZ)
ConnectGyroBtoT32MZandpress[GYSettingsTransfer].(PutdataonAintogyroB)
Select"Start"Thiswilldownload
thegyrodatatotheT32MZ.
When"GYSettingsTransfer"is
selected,thegyrosettingdatasaved
inT32MZiswrittentothegyro.
IfyoupressStarthere,theBdatawillbewritten
totheT32MZandtheAdatawillbelost.