5.5
Language selection
1.
Select SET and enter it by pressing key .
2.
Select FUNCTION and enter it by pressing key .
3.
Select LANGUAGE and enter it by pressing key .
4.
Select English / French / German / Danish / Swedish/
Finnish / Norwegian / Italian / Spanish / Russian / Polish/
Dutch and confirm the selection by pressing key .
5.6
Address setting
There is an ADDRESS between robot and charging
station. Factory already set address in advance, user
does not need to set the address before using it.
To reset the address:
1.
Select SET and enter it by pressing key .
2.
Select FUNCTION and enter it by pressing key .
3.
Select ADDRESS and enter it by pressing key .
4.
Press the button on the charging station.
5.
Mower will receive the correct address,press Yes
to confirm.
5.7
Range setting
1.
Select SET and enter it by pressing key .
2.
Select FUNCTION and enter it by pressing key .
3.
Select RANGE and enter it by pressing key .
4.
Select 1/2/3/4 and confirm the selection by
pressing key .
5.8
Rain
RAIN ON: mower goes back to charging station when it
is raining.
RAIN OFF: mower goes on working when it is raining.
1.
Select SET and enter it by pressing key .
2.
Select FUNCTION and enter it by pressing key .
3.
Select RAIN and enter it by pressing key .
4.
Select ON / OFF and confirm the selection by
pressing key .
5.9
Initial setting
Restore to factory settings.
1.
Select SET and enter it by pressing key .
2.
Select FUNCTION and enter it by pressing key .
3.
Select INITIAL and enter it by pressing key .
4.
Select YES / NO and confirm the selection by
pressing key .
5.10
System time setting
1.
Select SET and enter it by pressing key .
2.
Select TIME and enter it by pressingkey .
3.
To set Year.
-
Press key or key to scroll to Year setting.
press key to enter Year setting.
-
Press key or key to scroll to the correct Year.
and confirm the setting by pressing key .
4.
Set Week, Month/Date, Hour/Minute as Step 3.
5.
Press key or key to scroll to SAVE and save the
setting by pressing key .
5.11 Password setting
1.
Select SET and enter it by pressing key .
2.
Select PASSWORD and enter it by pressing key .
3.
Initial password: 1234
4.
To input OLD PASSWORD.
-
Press key or key to scroll to OLD PASSWORD
press key to enter it.
-
Press key or key to scroll to the correct password.
and confirm the setting by pressing key .
5.
To set NEW PASSWORD as Step 4.
6.
Press key or key to scroll to SAVE and save the
setting by pressing key .
Password function is optional.
SWITCH ON: every time the robot starts,
user has to input correct password.
SWITCH OFF: user does not need to enter password
when starts the mower.
5.12
Area setting
This function is to increase the efficiency of the mower
in a large area. It allows you to separate a larger area
into 6 small areas. The function should be used
together withP16-5.13 SCHEDULE TIME SETTING
,
take separate 3areas for example below.
1.
Select AREA and enter it by pressing key .
2.
Select AREA POSITION and enter it by pressing key .
3.
To select the working area.
-
AREA 1 is non-optional, selects this by default.
-
Press key or key to scroll to AREA 2 and press key
to select AREA 2 works. ā*ā comes in front of AREA 2.
To Next Page
Loading...
