FUXTEC FX-RB144 User Manual

- 18 -
7 . TROUBLE SHOOT I NG
7. TROUBLE SHOOTING
Problem
Display
Possible reasons
Solutions
Input the correct
password and select
AUTO mode, but the
mower still can not start.
And the charging station
is beeping.
1. The virtual wire fails to
send signals.
2. The virtual wire was
cut off.
1. Check the virtual wire
light on charging station.
Be sure the virtual wire is
connected to the charging
station well (light in
colorless).
2. Connect the virtual wire
with wire connectors.
Input the correct
password and select
1.main power is shut off.
Bad communication
between charging station
and mower.
1. Check the power and
make sure the charger is
connecting well with power
AUTO mode, but the
mower still can not start.
supply and charging
station.
mower stops and
beeps,AUTO or HOME is
not able to start.
1.Mower has loss contact
with charging station
1.Make sure charging
station is power on and the
virtual wire is connected
2.match address between
mower and station,refer to
5.6Address setting.
Mower stops working
1. Mower is lifted from
ground.
1. Take the mower to level
ground and restart it.
2. Take the object away
from mower and restart it.
and beeps.
2. Someone or object ride
or sit on the mower.
Mower stops working
and beeps.
1. Running wheel strike
1. Clean thelawn andmake
hard objects.
sure it is free from hard objects.
2. The mower is trapped
in lawn.
2. Clean the lawn where
mower is trapped or restart
the mower in another place.
Mower stops working
and beeps.
1. Cutting height is too low.
2. Blade strikes hard
objects.
3. Mower is trapped in lawn
1. Adjust the cutting height
to suitable height.
2. Clean the lawn and
make sure it is free from hard
objects.
3. Clean the lawn where
mower is trapped or restart
the mower in another place.

FUXTEC FX-RB144 Specifications

General

Brand	FUXTEC
Model	FX-RB144
Category	Lawn Mower
Language	English