APP USER MANUAL
The APP is available for IOS and Andriod phone.
Download and Install：
The Android user pls search “EGROBOT” in Google Play to download.
The IOS user pls se
.
arch “EGROBOT” in the Apple Store to download.
For the first time please connect the charging station and virtual wire
and turn on the mower according to the user manual.Then enter the smart
phone setting interface--WI-FI to connect the device.Pls note for first time it takes
about 3-5minutes to connect device, and the device can only connect with one phone
at the same time.
The using of the App:
Click the APP you installed and enter it.
Remote Control Function
1.Press ”Auto”, the mower will work
automatically.
2.Press “Remote”, the mower will work
in manual and user can direct the
mower to work with phone.
Pls note in Remote mode, robot does
not recognize the wire, station.
3. Press “Home”, the robot will go back
the charging station automatically.
4.Press “Switch” can stop the robot
and display will return to main
interface.
Pls note this does not work when robot
is charging.
5.We can control the blades by click
“MOW” on the bottom right corner.
Function setting
1.Enter this interface, we can set the
mower address from 01 to 58.
2. There are 11 languages for option,
and 4 options for range function.
3.For the functions like Ultrasonic
wave, rain sensor, touch sensor,
pressure sensor, compass and Audio
alarm are for option, can be turned on
or off.
After we setting function, please click
“Save”
Date
&
Week
&Time
User can se
t
speci
f
ic
t
ime on
t
his
in
t
er
f
ace
.
P
lease save your se
tt
ing
.
To Next Page
Loading...
Need help?
General
