- 11 -
14.
F
ACTORY RESET
TO RESET THE MACHINE TO DEFAULT FACTORY SETTINGS, FOLLOW THE INSTRUCTIONS BELOW.
1. TURN OFF THE MACHINE.
2. PRESS THE LUNGO BUTTON AND KEEP THE BUTTON PRESSED, THEN SWITCH ON THE MACHINE SIMULTANEOUSLY.
3. RELEASE THE LUNGO BUTTON AFTER 3 SECONDS OR WHEN YOU SEE THE BUTTONS FLASH. IF THE MACHINE IS WARMING UP AFTER RESET, THE MACHINE WILL FLASH MORE
THAN TWICE).
4. AFTER ABOVE OPERATION, THE MACHINE IS RESET TO FACTORY
DEFAULT SETTING- THE FOLLOWING PARAMETERS ARE RESET: COFFEE BREWING TIME, (ESPRESSO 25S AND LUNGO 40S)
15.
S
TEAMING OUT
/
S
TORAGE
/
T
RANSPORT
STEAMING OUT
PRIOR TO LONG PERIODS OF DISUSE OR FOR STORAGE OR TRANSPORT AT
TEMPERATURES BELOW 5 °C, IT IS ESSENTIAL TO STEAM OUT THE MACHINE. THIS REMOVES WATER FROM THE SYSTEM TO PREVENT INTERNAL FROST DAMAGE.
1. TURN ON THE MACHINE
2. EMPTY THE WATER TANK AND PLACE IT BACK IN ITS POSITION ON THE MACHINE.
3. PUT AN EMPTY CUP UNDER THE COFFEE DISPENSING SPOUT.
4. PRESS “LUNGO” BUTTON TO START BREWING.
STEAMING OUT NOW COMMENCES. AFTER THE PUMP STOPS AUTOMATICALLY, THE STEAMING OUT PROCESS IS COMPLETED.
TURN OFF THE MACHINE AND UNPLUG.
To Next Page
Loading...