Need help?Do you have a question about the G-project G-DROP and is the answer not in the manual?
General| Type | Portable Bluetooth Speaker |
|---|---|
| Brand | G-Project |
| Model | G-DROP |
| Waterproof | Yes |
| Frequency Response | 100 Hz - 20 kHz |
| Driver Size | 2 inches |
When G-DROP is in paring mode, the Bluetooth LED will flash blue. Once G-DROP has paired successfully with a Bluetooth compatible device, the Bluetooth LED will turn solid blue.
The red and white LEDs indicate the following statuses: Battery Status, Power Status, White LED, Red LED, Speaker Status.
Press the Power Button to turn G-DROP on and again to turn G-DROP off.
Increase or decrease the volume by using the + or – buttons. The White LED will flash once each time indicating the volume change.
Pressing the PLAY Button while in Bluetooth mode will play or pause the audio playback on your Bluetooth device.
G-DROP has 2 EQ presets (EQ1 / EQ2). Press the EQ Button to toggle between them.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions.
Any unapproved changes or modifications will void the warranty.
This equipment may cause harmful interference to radio communications. User is encouraged to correct interference by reorienting antenna or increasing separation.
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of received interference.
Use attachments specified by manufacturer. Keep away from open flames. Unplug during lightning storms or long periods of disuse.
Use only same or equivalent battery type. Do not expose battery to flames or dispose of in fire. Dispose of batteries properly.
To Next Page
