Press the + key to go to the next interval. The display will show 00:30 intermittently and, again, press one of the three keys
to allocate SUN, MOON or OFF (frost protection) from 00:30h to 01:00h or press + key directly if the existing
temperature level is ok.
Repeat these steps allocating the desired temperatures levels over the 24 hours of the day. Press the – key at any time to
modify a previous period. By reaching the 23:30 in the display and pressing + key, the controller will store the program and
will return to the previous mode.
At any time PRG key can be used also to store the program and return the previous mode.
1 - Press PRG 00:00
2 - Press Off
3 - Press + key 00:30
4 - Repeat steps 2 and 3 until display shows: 07:30
5 - Press On
6 - Press + key 08:00
7 - Press
8 - Press + key 08:30
9 - Press
10 - Press + key 09:00
11 - Press
12 - Press + key 09:30
13 - Repeat steps 11 and 12 until display shows: 13:00
14 - Press
15 - Press + key 13:30
16 - Repeat steps 14 and 15 until display shows: 15:00
17 - Press
18 - Press + key 15:30
19 - Repeat steps 17 and 18 until display shows: 19:30
20 - Press
21 - Press + key 20:00
22 - Repeat steps 20 and 21 until display shows: 23:30
23 - Press
24 - Press + key GRAB
EXAMPLE
Let’s see an example of how to introduce a
program with the above distribution of
temperatures.
OFF from 24:00h to 7:30h in the morning.
The heater will be on only if the temperature
drops to 3ºC.
SUN temperature from 7:30h to 9:00h.
MOON temperature from 9:00h to 13:00h.
SUN temperature from 13:00h to 15:00h.
MOON temperature from 15:00h to 19:30h.
SUN temperature from 19:30h to 24:00h.
To Next Page
Loading...
