Why is my Gainscha GS-2408D Label Maker printing irregularly?
If your Gainscha Label Maker is printing irregularly, it may be in Hex Dump mode. Turn the printer off and then on again to exit dump mode.
Why is my Gainscha GS-2408D not printing anything on the label?
If your Gainscha Label Maker is producing labels with no print, the label may not be loaded correctly. Follow the instructions for loading the media properly.
General| Resolution | 203 dpi |
|---|---|
| Printing Technology | Thermal |
| Max. Print Length | 1778 mm |
| Maximum Label Length | 1778 mm |
| Media Type | Roll |
| Supported Media Types | Continuous |
| Processor | 32-bit RISC |
| Memory | 8 MB Flash |
| Interface | USB, RS-232 |
| Connectivity | USB, RS-232 |
| Power Supply | AC 100-240V, 50/60Hz |
Overview of the Gainscha bar code printer, its applications, and key features.
Detailed specifications of the printer models including resolution, speed, and interfaces.
Guide to unpacking, inspecting, and identifying included items.
Detailed diagrams and labels of the printer's top, interior, front, and rear views.
Step-by-step instructions for physically connecting and powering on the printer.
Guide for installing the necessary software drivers for the printer on a computer.
Instructions for correctly loading label rolls into the printer.
Explanation of the status lights on the printer and their meanings.
Describes the functions of the FEED and PAUSE buttons in different modes.
Details on using button combinations at startup for testing and configuration.
How to launch and navigate the main interface of the utility software.
How to configure printer settings like speed, density, and label type using the utility.
Lists common issues, potential causes, and recovery steps for printer malfunctions.
Procedures and recommended materials for cleaning the print head, platen roller, and exterior.
Chronological record of manual updates, including version numbers and content changes.
To Next Page
