GAMMA SYSTEM GP02R.T User Manual

Use and Maintenance Manual – Pressure-sensitive bumpers type GSBPS 27/35
10.3 Testing Procedure
The testing procedure shall be carried out by qualified personnel whilst installing one or more pressure-
sensitive bumpers with one or more control unit and after each maintenance work, adjustment or
modification to the machinery and/or machinery control circuit.
Check the values of the sensor ohmic resistance as shown in the following points.
Testing ensures that the pressure-sensitive bumpers, the controller of the control unit, machinery and
machinery control circuit operate correctly in order to stop the machinery hazardous movements in case of
emergency situations.

GAMMA SYSTEM GP02R.T Specifications

General

Brand	GAMMA SYSTEM
Model	GP02R.T
Category	Control Unit
Language	English