Use and Maintenance Manual – Pressure-sensitive bumpers type GSBPS 9/35
5 Description of the product
Bumpers are made of a polyurethane material (foam) exhibiting appropriate elasticity and are coated with
protective fabric. Inserted inside the bumpers is a sensitive element (“sensor”) properly secured inside the
foam. The whole is closed by a frame that is glued to the foams and the aluminum plates. Inserted inside the
bumpers is a sensitive element (“sensor”) properly secured inside the foam. The whole is closed by a frame
that is glued to the foams and the aluminum plate.
The power supply cable is a 4-pole cable - 4*0,35mm
2
FROR 300/500 – standard length 3 m. (CS). Different
lengths can be supplied upon request (max. 10 m); indicate the length you require when ordering.
In the standard version, the pressure-sensitive bumper comes with a black fabric coating, front side with
yellow and black oblique stripes.
Standard shapes available:
Sensitive element
(“sensor”)
Polyurethane material
coated with protective fabric
To Next Page
Loading...
Need help?
General
