15
• The printer will enter manual feed mode automatically when you put papers inside
the manual feed tray.
• Please put one printing medium inside the manual feed tray each time and put in
another piece after finishing printing.
• Put the printing medium inside the manual feed tray with the printing side up; the
top of paper should be put inside first.
5. When the printed page is output from the printer, put the second piece inside according to the
above steps to continue printing. Slow action will lead to the prompt of paper out or paper failure
of manual feed tray. After paper is put inside, printing will be resumed automatically; too quick
action may make paper caught up in the printer, which will easily result in paper jam.
• After printing, please take out printed papers output from printer immediately.
Stacked papers or envelops will lead to paper jam or wrapped paper.
2.4. Non-printable Area
The shaded area indicates the non-printable area.
Top and bottom margins (A)
Left and right margins (B)
2.5. Paper application rules
• Rough textured, uneven, oil stained and extremely smooth paper will make printing effect poor.
• Please make sure that there is no dust, fluff, etc. on the paper.
• Paper shall be put on a flat surface and stored under a cool and dry environment.
To Next Page
Loading...
Need help?
General
