G&G GG IMAGE P4100 Series - General Settings; System Setting; Language Setting

64
9. General Settings
Note：
• Some functions are not available depending on different printer models. If you
have any questions, please contact the Customer Service.
This Chapter mainly introduces some general settings.
9.1. System Setting
9.1.1. Language Setting
"Language Setting" is used to select the language to be displayed on the control panel.
1. Press "Menu" to enter the Menu Settings interface.
2. Press "OK" to select the "System Setting" option.
3. Press “OK” key to select “Language Set” option to set language, as shown in the below figure: