GARDASOFT RC100 - Setting up Switched Output; Setting up Pulsed Operation

RC1xx - User Manual
10.2.4 Setting up switched output
Press and hold SEL for 1 second and follow the keystrokes below:
CH1
is displayed. Press the
SEL
button.
Use the
p
and
q
buttons to select
SOn
(Other options displayed are
SPu
and
SCo
). Press the
SEL
button.
bri
is displayed. Press the
SEL
button.
Use the p and q buttons to select the
required brightness from 1%to 999%.
Press the
SEL
button.
Use the p and q buttons to set the
Trigger flag:
F P
is enabled,
F-P
is
disabled. Press the
SEL
button.
Use the p and q buttons to set the
Error Detect flag:
F E
is enabled,
F-E
is
disabled. Press the
SEL
button.
Switched output is set up.
10.2.5 Setting up pulsed operation
Press and hold SEL for 1 second and follow the keystrokes below:
CH1
is displayed. Press the
SEL
button.
Use the
p
and
q
buttons to select
SPu
(Other options displayed are
SOn
and
SCo
). Press the
SEL
button.
bri
is displayed. Press the
SEL
button.
Use the p and q buttons to select the
required brightness from 1%to 999%.
Press the
SEL
button.
— 25 —