GARDASOFT RC100 - Viewing the Trigger Status; Viewing the Output Current

RC1xx - User Manual
10.2.9 Viewing the trigger status
You can view the trigger input status and whether the light is pulsing when
the TR-RC is set to pulse or switched mode. To do this, press and hold
SEL for I second and CH1 is displayed. Use the p and q keys to scroll to
trg and press SEL. The display shown below appears:
10.2.10 Viewing the output current
You can view an approximate measure of the output current from the
RC1xx front panel. The current measurement is updated roughly once per
second, but this can be slower when the RC1xx is set to pulsed operation.
To view the output current, press and hold SEL for 1 second and follow the
keystrokes below:
CH1
is displayed, Press the
SEL
button.
Use the p and q buttons to scroll to
UAL
and press the
SEL
button.
The measured output current is
displayed. Press the
SEL
button.
Continue to use the RC1xx normally.
— 29 —